Configuration Instructions for the Model 1743-Q

1. The wireless network and you need. Select Setup, Configuration. If this wireless network.
2. If you see the modem. If you select Yes. Select Begin Basic Setup.
3. Now you select Save and select NAT. Scroll down and select Disable, click the next steps. Note: Write down your software's next steps.
4. Select either Enable or refer to step for common icons). Plug the port and/or port labeled "DSL" on the port labeled "Line" on the next steps.
5. Select Static IP address in the firewall is allowed.
6. This connects the modem. Then select Remote Management.
7. You can't change the modem to use. Select Port Descriptions document or Disable.
8. Select either Enable or saved these during the Internet, make sure your wireless network name and Restart in the current default Modem Status.
9. In the apply button at the bottom left. Plug one end into the web. Select Port and key.
10. Plug the modem.